The results of the Wish List voting held during July and August 2008 are presented below. The Points column totals the votes for a particular wish by giving a wish ten points for each first-choice vote, nine points for each second-choice vote, etc. through one point for each tenth-choice vote.

The First Choice column indicates how many first-choice votes a wish received.

The Score column normalizes the Points total for a wish by dividing it by the number of voters so that the popularity of a wish can be compared across voting cycles even though the number of voters in each cycle would differ.

		Points		First Choice	Score
1.	True 64-bit support.	600	35		217.39
	Add "true" 64-bit support to Revit so users can dedicate more than 3GB of RAM to Revit.
	Submitted By:  Andrew Dobson
2.	More Stair options	507	7		183.70
	More landing options and rail returns and clean ups.
	Submitted By:  Andrew Brown
3.	Ability to convert detail lines to model lines and vice versa	471	7		170.65
	Ability to convert a Detail Line to a Model Line, and a Model Line to a Detail Line, without having to redraw them.
	Submitted By:  Bret Thompson
4.	"Mode-less" properties dialog	416	19		150.72
	Make the properties dialogue so that it can be left open and docked to the side of the screen, rather than having to close it to see changes that have been made.
	Submitted By:  Andrew Dobson
5.	Make wall and floor materials part of the room properties to allow finish scheduling	412	7		149.28
	I wish walls and floor materials were part of the room properties and from this generated a finish schedule.
	Submitted By:  Nicole Peterson
6.	Constraints more clearly visible in the family editor	385	5		139.49
	I wish that constraints were more clearly visible in the family editor. For instance, dimensions that are locked could appear a different color than those that aren't locked. That way you wouldn't have to click on each one to find out. And there could be a check box that would show wherever a line was aligned and locked to a reference plane. It would be great if you could right click on the padlock and whichever items that lock is referring to would turn a different color!
	Submitted By:  Rebecca Grace`
7.	Multi-Monitor friendly interface	347	7		125.72
	The ability to spread Revit screen elements across two monitors.
	Submitted By:  Shaun Kelly
8.	Reference Label "Sym" as an Instance Parameter	344	6		124.64
	For the Reference label ("Sym.", "Typ.", "Opp. Hand") to be returned to an instance parameter rather than a type parameter.
	Submitted By:  Aaron Rumple
9.	Better Schedule Sorting & Printing	320	9		115.94
	I wish I had an Excel-like controls over Schedules, formatting cells and fonts, having the changes reflect in my Schedule page and not on the sheet.
	Submitted By:  Eldad Asoulin
10.	Automatic door and window legends	313	5		113.41
	I wish it was possible to create automatic window legends, for example create a legend template where the plan and back view of every used door and window is shown ordered by mark. I'd also wish it was possible to tag legend components and auto-dimension named embedded ref planes. Automatic dimensioning is possible for walls already.
	Submitted By:  Bram Weinreder

11.	"SketchUp" like display styles	303	5		109.78
	Revit should have more display style effects . . . similar to SketchUp.
	Submitted By:  kevin ling
12.	Allow text tables in Revit	279	6		101.09
	It would be really nice if i were able to wrap text into multiple columns (similar to how i am able to wrap schedules)
	Submitted By:  Jill Fudo
13.	I wish i could choose different sizes & fonts in the same text box.	261	3		94.57
	I wish i could choose different sizes & fonts in the same text box.
	Submitted By:  Jean-Philippe Lamouric
14.	Curtain wall improvements	246	8		89.13
	I would like to make curtain walls with different curtain wall patterns. The panels can have the shape of triangles or multiple sided polygons. Also these curtain walls/system can be applied on curved and sloped surfaces.
	Submitted By:  Andrew P
15.	I wish there was a way to spell check the entire project	245	6		88.77
	I believe that the spell checker currently only checks the current view. I would like the option of running a spell check on the entire project.
	Submitted By:  Rob Ekstrom
16.	I wish that rooms could be demolished and therefore span phases	244	2		88.41
	I wish that rooms could be demolished and therefore span phases
	Submitted By:  Kelly Imparato
17.	Tie ratings of doors and windows to the walls that host them	243	5		88.04
	If you change a wall from a non-rated to a rated construction, it would be GREAT if the doors and windows associated with that wall changed to be rated also, and were reflected in the Door & HW and Window schedules.
	Submitted By:  Leo Tortoriello
18.	Quick select filter	242	5		87.68
	From the Revit Structure Wishlist: by: jrichardson http://forums.augi.com/showthread.php?t=26605 How about a filter that works similar to quick select in AutoCAD. Allow you to filter objects by properties or type. Seems like walls, framing, foundations, etc. is a little to general when filtering. I would like to select all 2'-0" wide footings, all column footings, hss shaped beams, joist only, etc. However the use of the current filter is helpful, just needs fine tunning.
	Submitted By:  Thomas Maleski
19.	Allow different size text for the Schedule Title and the Schedule Headers.	237	1		85.87
	I wish there was the ability to have a different size text for the Schedule Title and the Schedule Headers.
	Submitted By:  Dwane Lindsey
20.	Reorder parameters after creating them.	233	0		84.42
	Rearrange the order of parameters after creating them.
	Submitted By:  Tom E Flaherty
21.	Import formatted text from Word or RTF documents	223	5		80.80
	Revit needs to be able to import/link and work with .doc (or at least .rtf) text files. Been wished for before, but still no improvement in Revit 2009.
	Submitted By:  Weston Blaney
22.	Dependent view at different scale.	219	6		79.35
	When creating a duplicate view as dependent to the original view, I want to be able to make this dependent view a different scale than the original.
	Submitted By:  Gretchen Krumm
23.	More eave cut options	216	2		78.26
	There needs to be an option to cut the eave at any angle you wish.
	Submitted By:  Shaun Kelly
24.	I would like wall wraps to work where curtainwall is embedded in the wall as if the curtainwall were a window.	207	3		75.00
	I would like wall wraps to work where curtainwall is embedded in the wall as if the curtainwall were a window.
	Submitted By:  Ben Scott
25.	Allow non-rectangular curtainwall panels	207	4		75.00
	Calculate, Schedule and specify non-rectangular curtain panels
	Submitted By:  Jon Anunson
26.	Curved Elevation Views	205	3		74.28
	The ability to "unfold" a curved elevation to be viewed flat.
	Submitted By:  Martin Giles
27.	I wish we had a wall-based window that works on sloped walls. Both in- and outwards slopes with sill parameters.	201	3		72.83
	I wish we had a wall-based window that works on sloped walls. Both in- and outwards slopes with sill parameters.
	Submitted By:  Håvard Dagsvik
28.	Allow tagging in 3D views.	192	4		69.57
	This is particularly useful when making plumbing isometric views, but since it is a general interface change, I am posting it here.
	Submitted By:  John Hazucha
29.	Selection to hide objects in "other" views.	189	4		68.48
	I would like to be able to select an object, tag, etc., right-click and indicate to hide object/category in all OTHER views.
	Submitted By:  Mark Thurnauer
30.	Split project browser to show views and families separately	186	1		67.39
	I wish the project browser was split into a project browser and a family browser, possibly just a tab configuration, and adding a graphic display of the family.
	Submitted By:  Mathew Miller
31.	I would like to be able to copy and paste items between 2 open sessions of Revit.	182	3		65.94
	I would like to be able to copy and paste items between 2 open sessions of Revit.
	Submitted By:  Joel Londenberg
32.	I wish that text leaders would snap to detail components and lines	179	5		64.86
	I'd like to see the arrow of a leader line snap to the edge of detail components and detail lines so that I don't constantly have to eyeball where the end of the leader goes.
	Submitted By:  Rob Ekstrom
33.	I would like to be able to add a leader to a keynote.	172	7		62.32
	I would like to be able to add a leader to a keynote.
	Submitted By:  Nicole Peterson
34.	Right-click copy, paste, paste aligned	168	1		60.87
	Right-click options for "copy to clipboard", "paste" & "paste aligned".
	Submitted By:  Kell Pollard
35.	I wish there was a way to define different hatch pattern behavior between plans and sections	167	3		60.51
	I wish there was a way to define different hatch pattern behavior between plans and sections project wide. For example, I want the hatching on floor plans to orient to object but orient to view in section.
	Submitted By:  Kevin McCurdy
36.	Linking MEP elements to a RAC model	164	4		59.42
	I would like to be able to place ceiling hosted items using Revit MEP into a ceiling of a linked Revit Architecture project.
	Submitted By:  Jon Rempel
37.	Show more information on warnings	163	4		59.06
	I wish Revit would provide more information in the review warnings dialog, show who owns the object (on shared projects), and rank the warning by severity.
	Submitted By:  Wes Macaulay
38.	Allow 3D snapping	157	0		56.88
	Allow improved 3D snapping in Revit
	Submitted By:  Gary Murphy
39.	Allow linking and reloading of images	153	1		55.43
	I wish it was possible to link an image and reload it using manage links.
	Submitted By:  simon pollard
40.	Improved Filter Selection Tool	153	3		55.43
	I wish the Filter selection tool could drill down (via a little "+" button to Family types below each Category. I also wish each level/sublevel had a total column advising the number of items selected.
	Submitted By:  crispin schurr
41.	I wish you didn't have to open the properties window to change an instance parameter of a family	152	3		55.07
	I would like to be able to select a family and have all of the instance parameters pop up near the cursor in the modeling area. Once all of the instance parameters are shown you could click on the parameter you want to modify and changes the number, text, visibility, etc..
	Submitted By:  Roger Page
42.	I would like the structural beams, etc. to have an option for drawing curved beams.	150	2		54.35
	I would like the structural beams, etc. to have an option for drawing curved beams.
	Submitted By:  Ben Scott
43.	I would like the section line annotations to break and jog the same way that the grid lines and levels do.	143	2		51.81
	I would like the section line annotations to break and jog the same way that the grid lines and levels do.
	Submitted By:  Ben Scott
44.	Keyboard shortcuts that utilize the shift and control keys	142	0		51.45
	these are both easy keys to quickly use
	Submitted By:  Andrea Stafford
45.	I wish I could align / snap to objects that are sloped or curved when they are cut in sections	131	1		47.46
	I wish I could align / snap to objects that are sloped or curved when they are cut in sections
	Submitted By:  crispin schurr
46.	Dual-Unit dimensions	131	2		47.46
	Allow users to define two different dimension units to display at the same time (i.e., SI & metric).
	Submitted By:  Brett Wagner
47.	Family Scaling	128	4		46.38
	I wish Revit had a scale tool for 3d geometry.
	Submitted By:  sandeep rajendran
48.	Allow tickmark mixing on dimension strings	122	3		44.20
	When dimensioning, allow mixed use of tickmarks. For example, dots on grid lines and diagonals on other non-grid dimension extension lines within the same dimension string.
	Submitted By:  Greg Reizian
49.	Added Revision Drawing List Parameters	120	1		43.48
	To add a sheets “view scale”, "Current Revision" & "Revision issue date” parameter to your sheet list.
	Submitted By:  Brian Renehan
50.	I wish replacement windows worked like they do in the real world.	119	2		43.12
	I wish replacement windows worked like they do in the real world.
	Submitted By:  jessica wilks
51.	Ramp Break Lines	118	1		42.75
	Provide break lines for ramps that are cut in plan, in the same way as stairs are currently shown when they are cut in plan.
	Submitted By:  Brian Renehan
52.	I wish it was able to override railings panels	117	1		42.39
	I wish it was able to override railings panels
	Submitted By:  Paul Idzik
53.	Ability to create non associative or independent views	117	0		42.39
	Often times we need to set up an option to make an sk that needs to be independent of the model, but the only way to do this is to manually trace over the view. What we need is to have an option for a view to freeze and disassociate from the model.
	Submitted By:  Vincent Poon
54.	Assign text styles to dimensions and schedules	109	3		39.49
	The ability to assign text styles to dimensions and schedules instead of just the font type to allow better text control.
	Submitted By:  Felix Gonzalez
55.	Edit wall types like any other family	108	1		39.13
	I would like to see the wall type editor become more like editing any other family.
	Submitted By:  Mark Thurnauer
56.	Global shadow on/off.	104	0		37.68
	I would like a button on the toolbar to temporarily and globally turn off shadows (like the lineweight button).
	Submitted By:  Andrew Dobson
57.	Sheet-Sensitive note blocks.	101	4		36.59
	The ability to have some notes visible and others not depending on what sheet the note block is placed on.
	Submitted By:  Nick Bower
58.	Convert Masking to Filled regions and vice-versa	99	0		35.87
	Ability to convert Masking Region to a Filled Region and Filled Region to a Masking Region.
	Submitted By:  Bret Thompson
59.	Link Revision and Sheet Index	98	2		35.51
	I'd like to be able to use the checks for Revisions as parameters in my Sheet Index
	Submitted By:  Dave Plumb
60.	Simpler printing of schedules	93	1		33.70
	I wish the printing of schedules was simpler. They should be able to be printed directly from the schedule view in tabular format. Or alternatively - they should be able to cascade across multiple sheet views.
	Submitted By:  Matt Rice
61.	Freely rotating a tag once they are applied to elements	89	1		32.25
	http://forums.augi.com/showthread.php?t=33172 We really need for the tags to be freely rotating once they are applied to a member. I've just created several rolled members for a project and I have had to add text items to label the members because I cannot accept the appearance when using the tag.
	Submitted By:  Thomas Maleski
62.	Better Text Handling In Formulas	89	0		32.25
	add to the calculated parameters the ability to use AND(String, String), Left(String, Int), Right(String, Int) and Mid (String, Int, Int)
	Submitted By:  Jon Anunson
63.	Allow match tool to copy overrides	88	0		31.88
	Currently Match Tool default to default Object properties. I would like to match it to overridden values when desired by user.
	Submitted By:  Ashwin Patel
64.	Allow editing of wall parameters from Stacked Wall Dialog box.	88	2		31.88
	Allow editing of wall parameters from Stacked Wall Dialog box.
	Submitted By:  Zoltan Ferenczy
65.	Allow plane-based editing in 3D views	87	0		31.52
	3D cursor/icon which can be locked on a given axis.
	Submitted By:  Gary Murphy
66.	I wish legend views allowed instance parameter adjustment	87	1		31.52
	I wish legend views allowed instance parameter adjustment.
	Submitted By:  Patrick Smith
67.	Family Parameter Grouping, Sorting and Visibility.	86	2		31.16
	Better family Parameter Grouping, Sorting and Visibility.
	Submitted By:  Zoltan Ferenczy
68.	I wish that schedule keys could show up in tags.	85	2		30.80
	I wish that schedule keys could show up in tags.
	Submitted By:  Emily Santilli
69.	Improved error handling, especially in the family editor	82	3		29.71
	Improved error handling, especially when "flexing" a parametric family.
	Submitted By:  Aaron Ellsworth
70.	I wish the Edit Baluster Placement dialog had an additional justify option of "shrink to fit"	81	0		29.35
	I wish the Edit Baluster Placement dialog had an additional justify option of "shrink to fit"
	Submitted By:  Brett Wagner
71.	Show all line drawing tools without choosing them from a flyout menu	78	2		28.26
	Show all line drawing tools without choosing them from a flyout menu
	Submitted By:  dan bishop
72.	Allow select/edit of profile families from within the properties of objects using them	72	1		26.09
	I would like to be able to open a profile's family from selecting the sweep, etc. that uses that profile; similar to the way you can open other families by selecting them and hitting the "edit family" button.
	Submitted By:  Ben Scott
73.	Text representation for Yes/No parameters in schedules.	69	1		25.00
	Text representation for Yes/No parameters in schedules.
	Submitted By:  Zoltan Ferenczy
74.	Control over current "system" colors	69	2		25.00
	Control over "system" colors. Halftone: the current 50% does not work for many printers. It would be nice if we could change the level of halftone to address this. Indeed, having two levels of (user controllable) halftone would be valuable.
	Submitted By:  Gordon Price
75.	Switch between plan, section & detail callouts on the fly.	67	0		24.28
	Provide the ability to switch from plan/section callouts to detail callouts.
	Submitted By:  vincent Poon
76.	I would like to have cutain wall panels and mullions that take the shape of a curved or blended mass.	65	3		23.55
	I would like to have cutain wall panels and mullions that take the shape of a curved or blended mass.
	Submitted By:  Lisa Brooksher
77.	Filter for the legend component drop-down list.	61	0		22.10
	I would like Revit to filter legend components based on families in use in the project.
	Submitted By:  Clinton Wernars
78.	Duplicate view and All Dependant Views.	59	0		21.38
	When duplicating a view with dependent views (to create an independent view) there should be an option to also duplicate the dependent children to create a second set of dependent views that are children of the new copy.
	Submitted By:  Zoltan Ferenczy
79.	Show Elements that have Graphics Overrides Applied in Reveal Hidden Elements Mode	49	1		17.75
	Show Elements that have Graphics Overrides Applied in Reveal Hidden Elements Mode
	Submitted By:  Zoltan Ferenczy
80.	Allow Copy & Paste for Area Boundary Lines	48	1		17.39
	Allow Copy & Paste for Area Boundary Lines
	Submitted By:  Dave Plumb
81.	Provide a Line-Based Wall Hosted family type. (Ceiling, floor, etc. as well)	43	1		15.58
	Provide a Line-Based Wall Hosted family type. (Ceiling, floor, etc. as well)
	Submitted By:  Scott Womack
82.	I wish Revit would not implement changes to the model until I click OK	42	0		15.22
	I wish Revit would not implement changes to the model until I click OK
	Submitted By:  Michael Patrick
83.	Make family element visibility settings view-specific	37	0		13.41
	In the family editor Family Element Visibility Settings add Detail Levels to each View Specific Display independently.
	Submitted By:  Craig Cernek
84.	Make a tags information editable by selecting it or its object.	36	0		13.04
	Make a tags information editable by selecting it or its object.
	Submitted By:  Craig Cernek
85.	Allow central file path to be a separate label in titleblock families	35	1		12.68
	"Central File Path" as an added "LABEL" which can be put on the title block sheet
	Submitted By:  JIMI OLADIMEJI
86.	Reference Plane Limitations	35	1		12.68
	Limit the Z height of new reference planes to the height of the current view as a checkbox option when creating the ref plane
	Submitted By:  Aaron Rumple
87.	Preview objects when rotating or moving	30	0		10.87
	Preview objects when rotating or moving
	Submitted By:  Dave Plumb
88.	Expand API printing functionality	30	0		10.87
	Make the Revit API .Print() function have more functionality, like choosing printers, print settings etc. See this post for some more insight: http://forums.augi.com/showthread.php?p=799723#post799723
	Submitted By:  Rodney Howarth
89.	Allow insertion of view from template files	28	0		10.14
	Allow insertion of view from template files
	Submitted By:  Dave Plumb
90.	Allow shared coordinates to be used in topo and roof/floor shape edit points	27	1		9.78
	Allow shared coordinates to be used in topo and roof/floor shape edit points
	Submitted By:  Ashwin Patel
91.	Revit should only require "User" rights.	25	2		9.06
	Revit should only require "User" rights.
	Submitted By:  R. Robert Bell
92.	Title Case Correction	3	0		1.09
	The built in fill pattern "Solid fill" should be renamed to "Solid Fill". The factory should be consistent in its use of title case.
	Submitted By:  Aaron Rumple
93.	The ability to have the icons to the left of the open dialog box be small by default	1	0		0.36
	The ability to have the icons to the left of the open dialog box be small by default: http://www.users.on.net/~stevevk4sjh/smallicons.jpg so that you don't have to right click each time
	Submitted By:  Rodney Howarth