CAD Management: Standardize for Success!

February 21st, 2013

When working in the AEC Industry, it becomes instantly obvious that standards, apply to everything. From building codes, to governing agencies, to national AIA guidelines, all aspects of the process is documented and standardized…except one; the standards of drawing. Yes we have things like the National CAD Standards, but nothing is set in stone within your firm unless they have their act together and understand the importance of these standards.



On top of that, BIM and VDC are sweeping the globe with concepts and products that require an entirely new set of standards and workflow methods. These items need to be addressed as soon as possible and it’s not only your firm that needs to coordinate with these standards. From inner office projects, to multi-industry projects that require models to be taken from design development, to facilities management provisions, these standards can make or break an entire project’s profitability.

These standards are also not something that can be set up or created in a single manual. I have spent the last ten years working around this topic, and I have learned; the sooner these are created and implemented within your firm, the better and more efficient and productive (and profitable) your firm will become. The reason I saw “around this”, is because that’s exactly what I did. I spent years focusing on specific project needs, running around putting out fires, and working hard to customize items per project managers wants, not according to any firm-wide standard. I can save you the time and tell you now the result of this method is chaos, redundant work on my part, redundant work on their part, and a huge waste of overall company time, effort, and money.

The conclusion was simple; standardize the workflow. Not only is it important to standardize specific annotations, naming conventions, and file management, but to really get into the processes involved; from software choices, project structure, to coordination methods, and finally providing deliverables. This cannot be contained in one document since it affects multiple disciplines, multiple levels within the company, and above all, the most important reason; no one will read a two thousand page manual.

This led me to creating not one, but an entire system of documents; something that would allow for everyone, within their specific workplace, at their specific level, the ability to understand and standardize their specific work and methods of achieving such work. The following include:

The initial document; created by my current firm over 20 years ago, required minimal updates and for the most part, still heavily applies to this day. The Production Procedure Manual was created in-house, for all studio members within the firm, to explain the reasons for why we create and produce what we do. This involves methodology, conceptualization, general recommendations, common sense and best practice items, and other forms of thought and reason. This is NOT describing the steps to create drawings, nor does it include specific rules and procedures to follow, but merely to provide an overall understanding of the beginning stages of what makes our firms drawings look the way they do and why we have created these standards and methods to do so.

With a BIM Execution Plan (BEP) created and provided for each new project; client demands, government requirements, and consultant coordination are all addressed for the overall benefit to all parties involved in the initial meeting. This coordination blueprint, specific to each project, includes best practices and workflows for the owner, architect, engineers, and construction manager to deploy CAD drawings or building information modeling (BIM) technology to its fullest potential. This includes delineated roles and responsibilities of each party, detail and scope of information to be shared, relevant business processes, and supporting hardware and software recommendations, all decided on before a single line is drawn.

This BEP document is typically included within the initial project kickoff meeting and benefits all parties involved, but mostly it gives the owner/client a strong understanding of what we are planning and supports his inclusion within the project specifics including timelines, meeting and contact info. This process also provides maximum unity, understanding and overall clarity to a CAD/BIM project, allowing a much better workflow from SD through FM.

The Consultant Coordination Manual is created by the Architect and intended for the consultants design team and their project manager, as an overall coordination guide and reference manual. This document was made to provide detailed and strategic instructions that we require to be standardized, for best coordination efforts and workflow methods between the Architect and all consultants involved. This documentation includes the following processes:

• BIM Introduction (If applicable)
• Coordination requirements: X-refs, Linking, and Worksharing
• LOD understanding and Blocks/Components
• Strategy & Best Practices

Typically, we do our best to supply each consultant with one of these packets when arriving at the Project Kickoff Meeting to help significantly with efficiency and productivity for the entire project lifespan, as soon as possible. Consultants enjoy the clarity, and we enjoy the simplicity.

The firm BIM Standards is the last on the list. This document is the next logical step to creating a uniform look, layout, and to begin organizing the processes for users to follow. These standards are not put in place to restrict, deter or regulate, but instead to entice organizational thought, provide ways to be as efficient as possible and allow users to thrive and design, rather than waste time and energy adjusting and revising something that’s already been done ten times before. These standards are meant to support the individual architect and help the overall company at the same time. Topics include;  Drawing and Annotations, Template Information, Project and Infrastructure Organization, Component and File Management, Folder and Network Management, Interoperability, Collaboration, Deliverables, etc.

These documents work in conjunction with each other to provide a clear, understood, and distinct process for taking a project through the appropriate phases required and utilizing the best possible workflow methods in the process. If these are set up in your firm, and allowed to be used as a backbone to the processes and become the standard to how your workflow is done, you will see a level of consistency, reliability, and foundational solidity that would take ten times as long to provide using any other possible method.

Do your best to make this happen, work with the architects, meet with the owners, present these ideas with everyone in between and make these standard documentation part of your firm, and you will see the benefits as I describe above. Please take the time to contact me with any feedback, suggestions, additional comments or input, and thank you for your time and support with AUGI!

 

Join AUGI Today

Become part of the largest Autodesk community

About the Authors

Brian Andresen

Brian Andresen

Brian Andresen is a Senior Technical Specialist with USCAD with over 15 years of experience working in the AEC Industry, 12 of those years with Revit. Brian has worked diligently to simplify the processes involved with the program for the end user and continue to do so by providing CAD/BIM support, training, management, implementation, and standards throughout. For more information, please visit http://about.me/cadbimmanager.

 

Appears in these Categories