Hello, and welcome to the latest Civil 3D Wish List Ballot. There are a many wishes to review and vote for, and I appreciate you taking the time to help make Civil 3D a better product for all. We have made some improvements to the list, which will hopefully make voting a little bit easier.
You must be logged in to vote on Civil 3D Wishes.
|
|
| API |
(click to expand/collapse feature) |
|
|
Access Object Sub-entity Layers via the API |
| Make the layers of Civil 3D sub-entities available via the API so we can use tools like the AutoCAD/Express layer tools to change the layer properties.
For example, I want to be able to pick a contour that is part of a Civil 3D surface and turn off the layer the contour is on. |
| Submitted By: Jeff Paulsen |
| |
|
|
|
|
|
Copy Superelevation Table |
| Add the capability to copy an existing superelevation table. |
| Submitted By: simon noyola |
|
Slide Bearing Grips for Alignment PI's |
| Add new grips to the horizontal alignments to allow us to drag and maintain the incoming or outgoing bearing of the alignment. |
| Submitted By: Denis Simenic |
| |
|
|
| COGO |
(click to expand/collapse feature) |
|
|
Label Lines and Curves by Points |
| The ability to label lines and curves by selecting points (endpoint, midpoint, etc). |
| Submitted By: DANIEL YORK |
|
Offset distances in Best Fit Lines/Curves |
| Add the capability to add an offset distance to a point being used in a best fit line/curve. |
| Submitted By: Nicholas Messina |
| |
|
|
|
|
|
Automatic Assembly Overrides |
| Automatically override assemblies in corridors to simplify intersection design. |
| Submitted By: Mike Pryor |
|
Corridor Properties Dialog Box to be Modeless |
| I would like the corridor properties dialog box to be modeless so I can pan and zoom in my drawing with it open. |
| Submitted By: Daniel Chapek |
|
Curb and Gutter Subassembly with Targets |
| Add a curb and gutter subassembly that has a target at the flange point and at the flowline of the gutter. |
| Submitted By: Jason Alligood |
|
Layout Profile Linked to Surface Profile |
| Add the ability to create a layout profile that is defined by a vertical offset from a surface profile. The layout profile should remain dynamic to the surface profile. |
| Submitted By: Eline Huysmans |
|
Rebuild All Corridors |
| Add the ability to rebuild all corridors at one time. |
| Submitted By: Yatri Nomadic |
|
Set points on Corridors at Sample Lines |
| Add the ability to specify which corridor stations GOGO points will be created for. |
| Submitted By: Jeff Paulsen |
|
Simple Daylight Subassembly |
| Add a simple daylight subassembly. |
| Submitted By: Jake Bendik |
|
Specify default target for assemblies |
| I would like to be able to set a default target alignment and/or profile to subassembly components in an assembly. |
| Submitted By: Jeff Sears |
|
Subassembly Creation Tools |
| Create a tool that will allow a user to create a parametric subassembly similar to the way Dynamic Blocks are created. |
| Submitted By: uzumaki naruto |
|
Target bottom of retaining wall to alignment and profile |
| Create a new retaining wall subassembly that allows the user to target an alignment and profile to the bottom of the wall. |
| Submitted By: chris nastally |
| |
|
|
|
|
|
Civil 3D and AutoCAD MEP interoperability |
| Allow AutoCAD MEP objects and Civil 3D objects to reside in the same drawing without having to use Proxy objects. |
| Submitted By: Allen Closson |
|
Surface Data Management |
| Remove surfaces from the drawing and place them back in a database. |
| Submitted By: Ivan Wassum |
| |
|
|
|
|
|
Create Multiple Feature Lines from Corridor |
| I would like to be able to select the corridor lines with a crossing/window, using multiple picks and also by specifying the codes and have the program create feature lines for all selected corridor lines. It would be even better if a list of codes was displayed in a dialog with check boxes next to each code.
After selecting the desired corridor lines the Create Feature Line From Corridor dialog should appear allowing the user to specify Site, name, style, layer, smoothing and whether or not the new feature line is linked to the corridor. |
| Submitted By: Jeff Paulsen |
|
Daylight Feature Line without using Grading Group |
| Ability to create daylight feature lines to a surface without creating a grading object. |
| Submitted By: Tyler Rhead |
| |
|
|
| Grading |
(click to expand/collapse feature) |
|
|
Change the Grading Criteria of an Existing Grading |
| I would like to be able to change the grading criteria of a previously created grading.
There are times when I have created a grading using, lets say, a Distance and Slope criteria. Later I want to change that to a Distance and Elevation Difference criteria. Currently the only way to do that is to erase the grading and make a new one. This is a real problem if the are additional gradings created from the one that I want to change.
A logical place to put this would be in the Grading Properties. The criteria is listed there but it cannot be changed. |
| Submitted By: Jeff Paulsen |
|
Grade to Surface with Rounded Tie-In |
| Add the ability for contours to contain arcs. |
| Submitted By: CHRIS BIRD |
|
Grading Corner Cleanup Options |
| Add grading corner cleanup style options such as: fillet, chamfer, straight and none. |
| Submitted By: Andrey Kochetkov |
|
Grading Group Elelvation Control |
| To be able to set a Grading elevation based off the corridor elevations with an adjustment added to it. EX: set a pad at 18" above the lowest point of the back of curb along the front of the lot. |
| Submitted By: simon noyola |
|
Set Selected Feature Line Elevations by Reference |
| I would like to be able to window/crossing select elevation points in a feature line. |
| Submitted By: david park |
| |
|
|
|
|
|
Hydraflow integration with Civil 3D |
| Hydraflow should be integrated into Civil 3D eliminating the need to export/import between applications. |
| Submitted By: James Quilacio |
| |
|
|
| Parcels |
(click to expand/collapse feature) |
|
|
Comma in Parcel Area |
| I would like to have the ability to have commas when I have values over a thousand. |
| Submitted By: Lisa Roth |
|
Parcels display control |
| There should be a way to control the display order of parcel components and labels. |
| Submitted By: David Growcott |
|
Sort Parcel Table and Sum Columns |
| Add the ability to sort by more than one column and provide the ability to sum the values in a column. Add the Parcel Style as a property to be used when defining table columns. |
| Submitted By: Kent Schellinger |
| |
|
|
| Pipes |
(click to expand/collapse feature) |
|
|
Above Ground Pipe Design |
| Add the ability to design pipe above ground. |
| Submitted By: Hans Moggert |
|
Allow Vertically Curved Pipes |
| Allow pressure pipes to follow the grade under a road with a vertical curves. The pipes would have the capability to have a vertical curve assigned to them as well. |
| Submitted By: Keefe Lee |
|
Convert Pipe Network to .csv |
| Add the ability to import a pipe network from a CSV file. |
| Submitted By: Wim De Winter |
|
Joining Pipe Networks |
| The ability to join multiple pipe networks into one. |
| Submitted By: Jeremy Stortz |
|
Set slope on pipes |
| Set a constant slope on the pipes between two structures or pipes. |
| Submitted By: Brian Hailey |
| |
|
|
|
|
|
Additional tools for plan production |
| Plan Production Tools, Map Book, and Sheet Set Manager need to updated to be more of a dynamic and complied document management part of the program. |
| Submitted By: keith warren |
|
Greater control of Matchline Locations |
| Add the ability to move matchlines to any location within the viewframe, including the viewframe edge and make the view frame overlap a seperate setting. |
| Submitted By: Ryan Holm |
|
Plan Production Multiple Plan Views per Sheet |
| Add the ability to specify multiple plan views on one sheet. |
| Submitted By: kevin mills |
| |
|
|
| Points |
(click to expand/collapse feature) |
|
|
Drag points to point groups. |
| Add the ability to to drag and drop points into point groups in the Prospector. |
| Submitted By: Matt Miyamoto |
|
Enhanced Point Selection Methods |
| Add the ability to select points for group or point number so the can be modified. |
| Submitted By: Lisa Roth |
|
Link Point Elevations to Surfaces to act like Spot Elevation Labels |
| Add the ability to link a points elevation to a surface. This will allow the point to be used as a spot elevation label and would ensure the point elevation is always current with he surface. |
| Submitted By: kurt baldwin |
|
Points with reference text |
| Add the ability to add reference text to point labels. |
| Submitted By: kurt baldwin |
|
Select points by group. |
| Add the ability to select points by point group. |
| Submitted By: Greg Smith |
| |
|
|
| Profiles |
(click to expand/collapse feature) |
|
|
Allow more then two profiles per band |
| The ability to have more than two profiles referenced in a profile band. |
| Submitted By: Jason Alligood |
|
Control the display of end of profile labels. |
| The ability to turn off the end of alignment station label in the profile bands. |
| Submitted By: Mark Jung |
|
Edit profile geometry of an empty profile |
| Add the ability to select a profile to edit geometry other than selecting it on screen. |
| Submitted By: Brian Hailey |
|
Linetype Generation in Profiles |
| Layout profiles and static profiles should honor linetype generation. |
| Submitted By: Sonia Borba |
|
Profile View Grips for Resizing Profile Views |
| Add grips on profile views to make resizing the view easier. |
| Submitted By: Nick Dylla |
|
Profile View Last Label Display Option |
| Create an option to turn off the end alignment station in profile view. |
| Submitted By: Sarah Nichols |
|
Show intersecting profiles |
| Automatically show intersecting alignments on the profile. |
| Submitted By: Mike Pryor |
| |
|
|
|
|
|
Automate Working and Data Shortcut Folders |
| Automate the selection of the Working and Data Shortcut Folder when Switching Drawings. |
| Submitted By: Vera Habashi |
|
Data reference for cross sections |
| Create an independent drawing with cross section data and section views that are dynamic. |
| Submitted By: Rick Spangenberger |
|
Data Reference Manager |
| Add a data reference manager similar to the reference manager in AutoCAD. |
| Submitted By: Jeff Paulsen |
|
Data Reference Points Outside of Vault |
| Data Reference points from drawing to drawing without having to use vault. |
| Submitted By: Jethro Vail |
| |
|
|
| Reports |
(click to expand/collapse feature) |
|
|
Corridor Report: Coordinates and Offsets of Assemblies |
| Better control on setting out (staking) report output to surveyor's requirements. |
| Submitted By: Harold Alberto |
| |
|
|
| Sections |
(click to expand/collapse feature) |
|
|
Add ROW Labels in Sections. |
| I would like to easily attach ROW lines to sections. These could be alignments or parcels. |
| Submitted By: Henning Buch |
|
Dynamic Swath Width for Sample Lines |
| Add the ability to dynamically link the swath width of sample lines to an alignment. If the alignment changes, the sample lines change dynamically. |
| Submitted By: J R |
|
Edit sections in the section view. |
| Add the ability to edit cross sections in a drawing simliar to View/Edit Corridor Section. |
| Submitted By: Gary Moorman |
|
Improved Multiple Section View Spacing |
| Civil 3d should be able to better fit section views on a sheet to optimize the number of sections on each sheet. |
| Submitted By: Matt Kolberg |
|
Toggle all sample sources on/off for sample lines |
| Add an on/off toggle when creating a sample line group to toggle the sampling of all surfaces on or off. |
| Submitted By: Yatri Nomadic |
| |
|
|
| Styles |
(click to expand/collapse feature) |
|
|
Add background shading to labels |
| Add a shading behind a label border. |
| Submitted By: Marc Ochoa |
|
Drag and Drop Styles to Multiple Drawings |
| Drag styles from one drawing to all the drawings in a set of drawings. |
| Submitted By: Allen Closson |
|
Label mask only masks the item being labeled. |
| An option in the label style to offer to mask ONLY the object being labeled. |
| Submitted By: Jeremy Nelson |
|
Pipe and Structure Reference Text in Labels |
| Add pipe and structure properties to label reference text. |
| Submitted By: Fred Mitchell |
|
Pipe Network Label Sets. |
| The ablility to create pipe network label sets. |
| Submitted By: Matt Kolberg |
|
Purge Styles |
| Add the ability to purge unused styles. |
| Submitted By: Donna Gerlinsky |
|
Style Manager |
| Styles Manager:
A better Stiles explorer tool than the Settings tab in Toolspace. This tool should allow for easier styles editing, sorting and grouping. The user should be able to save sets of styles defaults and use them as themes that can be easily switched from one to another with one click of a button. |
| Submitted By: Miroslav Bosilkov |
|
Styles available through Design Center |
| Expand the abilities of Design Center to recognize C3D styles. |
| Submitted By: Alex Hebert |
|
Wrap Label Text like Mtext |
| Add the ability to set a width for C3D labels to force them to wrap similar to mtext. |
| Submitted By: Ryan Holm |
| |
|
|
|
|
|
Additional information for surface edits |
| Include the user, date and time in the list of surface edits. |
| Submitted By: Jake Bendik |
|
Label Dialog Box for Surfaces |
| Add the option in the Ribbon to open the label dialog box when a surface is selected. |
| Submitted By: Brian Hailey |
|
LiDAR Data Support |
| Improve the process of working with LiDAR data in AutoCAD Civil 3D. |
| Submitted By: Anthony Tam |
|
Lower a portion of a surface. |
| Lower portions of a surface bounded by a polyline or feature line. |
| Submitted By: Paul Mawson |
|
Rebuild All Surfaces |
| Add an option to rebuild all surfaces at once. |
| Submitted By: Jake Bendik |
|
Stripping Calculations |
| Add a stripping option to the surfaces for volume calculations. |
| Submitted By: Lee Winters |
|
Use Hatches as well as Solids in Elevation Analysis |
| Add the ability to specify a hatch pattern for surface banding. |
| Submitted By: avishek chhibber |
|
Water Drop Depression Setting |
| Provide a minimum depth setting for the water drop command so small depressions can be ignored. |
| Submitted By: Ryan Holm |
| |
|
|
| Survey |
(click to expand/collapse feature) |
|
|
Curves created via a Radial Bearing |
| Add the ability to create curves based on a radial bearing. Can be done with both a command as well as a transparent command. |
| Submitted By: Nicholas Messina |
| |
|
|
|
|
|
Pop-Up Ribbon Tabs to remain open until closed |
| I wish the design component tab opened from the modify tab would remain open until closed. |
| Submitted By: Brian Hailey |
|
Snaps on Databands |
| Allow object snaps to recognize and snap to databands. |
| Submitted By: Keith Kempker |
|
Tooltips on Grips |
| Allow tooltips to display when mouse is on a grip. |
| Submitted By: Jeff Buffie |
| |
|
|
| Other |
(click to expand/collapse feature) |
|
|
Edit Note Labels from AutoCAD Properties Window |
| Add the ability to edit note label contents using the properties dialog. |
| Submitted By: Greg Smith |
|
Position labels differently at different scales like annotative text |
| Add the ability to specify display scales for C3D labels so they can be shown in different locations and rotation angles at different scales. |
| Submitted By: Darin Green |
|
Underground Duct Banks/Cable Trenches |
| Add the capability to design Underground Duct Banks/Cable Trenches Functionality in the future releases of AutoCAD Civil 3D! |
| Submitted By: William Gates |
|
Use Civil 3D Data in Fields |
| Make Civil 3D data available as field data. |
| Submitted By: Aaron Litteken |
|
|
