Recently Active Forums

visit the AUGI forums

Update Title Block Lisp Problem

Can you share an example drawing with the layouts set up the way you need them... Maybe show a finished version too. I would avoid using the selection set method... IMHO Iterate through the layouts collection and iterate through the items in the block (objects) collection looking for...

Posted: by peter

Move an existing Sweep Profile and Path?

I've figured it out: move the reference lines that I later picked to define the path, and the sweep moves. I turned off the sweep to find the reference lines then set the work plan to align with the direction the sweep was to move. Counter-intuitive to me, as once the sweep is created I would think...

Posted: by lost again again

2015 Switch element draw order

This has bothered me for years. Look at the attached screen shot. Do you see the difference in how the two columns are displayed? They are exactly alike. The only difference is that column 1 was placed before the beam, and column 2 was placed afterwards. It has nothing to do with View Range. ...

Posted: by etornberg

2015 cap precast plank end cuts

How would this be done in the field; cut to length and fill the cored openings or cut short and cast a 'cap'? I'd probably just create a face based family and attach it to the cut end of the beam

Posted: by Dimitri Harvalias

2015 Any need to maintain multiple versions of Navisworks?

If you have everyone on the same version and SP of Navisworks then there isn't much need. You can downsave to several earlier versions if you have a need to work with those who are still using an early version of Navisworks; in that case you'll need one or two installs provided the licensing terms...

Posted: by dgorsman

Recent Posts on BLAUGI

visit BLAUGI

AUGI HotNews - May 2015

Read the full issue (must be logged into in your browser. The full issue contains the below articles, plus sections - Forum Hot Topics, Want to Volunteer?, Special Announcements, HP Workstations, Articles You May Have Missed, Heads Up, Autodesk...


AUGIWorld May 2015 Issue Released!

Now that the new Autodesk software releases are rolled out, it's time to implement. For those who have done their homework and prepared for the implementation, it should be a relatively smooth process. If you are among those who haven't...


Recently Added Wishes

visit the wish list

Column Heights

I would like to be able to use the column height with custom parameters built into the column family.  For instance we need to formwork area of a column and we need the height to calculate that information.  The only work around I…


Better Legend Creation Tools

Revit does not filter the placed families within the project to be available for placement inside the Legend view. It can only provides a full list of the families to search for when placing into your view. This is a tedious process and there is…


Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

Poll - June 2015

See results in HotNews and the Library

Upcoming AUGI Events

  1. Revit Technology Conference - North America 2015

    1. Crystal Gateway Marriott, Washington, DC, USA
  2. Revit Technology Conference - Asia 2015

    1. Equarius Hotel, Resorts World Sentosa, Singapore
  3. Revit Technology Conference - Europe 2015

    1. Corinthia Hotel, Budapest, Hungary
  4. Autodesk University 2015

    1. Venetian Resort Hotel Casino, Las Vegas, NV, USA

AUGI Benefactor

view all


Autodesk is a world leader in 3D design, engineering, and entertainment software.



The power to do more.



Partnering for your success