Recently Active Forums

visit the AUGI forums

LISP routine to load layers

Okay Thanks I will give that a try. Thanks again for this info.

Posted: by rbhazie

2013 Alignment Station Labels based on Time

Also, I forgot to mention - the problem is nonsystematic. It only happens every so often. The redundancy in the seconds generally only becomes visible at the values that are more perfect in higher stages of the calculation, such as a perfect minute carrying into the seconds. The seconds errors...

Posted: by sebastien795355

2007 Como recuperar dwg?

>>per google translate: Hello! I recently recovered DWG files on a hard drive with a damaged partition, however, all recovered files can not be seen or recoverable until 2007. autocad 2004 DWG files are . Is there any software available to help repair someone can refer me DWG files ? You can...

Posted: by cadtag

2015 REVIT and math/logic

There is no point object on its own butpPoints are available as part of the reference line objects if you tab select them. there is a hierarchy and Revit will establish 'automatic' sketch dimensions that may help you understand how things are governed. See the attached example that uses ref lines...

Posted: by Dimitri Harvalias

2015 Linear array based on center point

Ben, you are correct that arrays can't be created to grow in two directions but you can constrain them so it behaves in a similar way. See the sample below. The array needs to be constrained so it is centered on its origin. When you create the array use the 'Last' option and lock the left side...

Posted: by Dimitri Harvalias


Recent Posts on BLAUGI

visit BLAUGI

AUGI HotNews - March 2015

Read the full issue (must be logged into AUGI.com) in your browser. The full issue contains the below articles, plus sections - Forum Hot Topics, Special Announcements, HP Workstations, Articles You May Have Missed, Heads Up, Autodesk News, AUGI Members'...

Posted:

AUGIWorld March 2015 Issue Released!

When it comes to using Autodesk software, there are a couple of certainties. One is that you will not use the software in its out-of-the-box state for very long. The other is that you will, over time, learn an impressive...

Posted:

Recently Added Wishes

visit the wish list

Add to Point Group (and other associative functions)

Ever wish you could just right click a point and have an option “Add to Point Group…” that opens up a fly-out with a list of point groups you could add it to? This could happen for numerous other prospector functions to lighten the load…

Posted:

Keynotes colour scheme

When we want to locate a repeating detail or solution, before explaining it in a detailed view, it’s useful to have a general plan showing how many times it’s applied on the building, and where are them.  We use to call it…

Posted:

Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

Upcoming AUGI Events

  1. Autodesk University 2015

    1. Venetian Resort Hotel Casino, Las Vegas, NV, USA

AUGI Benefactor

view all
Autodesk

Autodesk

Autodesk is a world leader in 3D design, engineering, and entertainment software.

Dell

Dell

The power to do more.

HP

HP

Partnering for your success