Recently Active Forums

visit the AUGI forums

CAD Drafter

I'll be really interested to see if anyone else has different versions of this type of lisp since this is the vast majority of the type of lisp I do. So here's three routines. Code: --------- (defun trapUP (errmsg) (setvar "clayer" oldlayer) (setvar "plinegen" oldgen)

Posted: by Varlth

2015 Bringing back deleted elements

Have you checked users' Local files? There should be a bunch of versions of local files on each users' PC. If you find one that has the missing topo, just copy paste into another local ( in same session of Revit) and then STC your current local file.

Posted: by cliff collins

2016 Migrating from Acad 14 to Acad 2016

Rick, I jumped from R14 to 2015. I wrote an 18 part series about my "adventure" you might find helpful. It's not a tutorial. Good luck and have fun.

Posted: by duhvinci

Annotative Field References

Does anyone know of a way to make field references annotative for example if I have a 5" line when at scale 1"=1'-0"...the line would be shown as 5'-0"... Therefore any field reference that I use...the objects scale would need to be the same as the templates scale, correct me if I'm mistaken...

Posted: by mbrandt5

2014 3D lines missing when I plot and some that I don't want are there

I have a 3d solid of a piece of HSS and angle iron. The HSS cross section is square with rounded corners. When viewed isometrically and plotted, the round corners are not visible. I have tried Dispsil and Hideprecision to try to correct but it still doesn't show. Also, a piece of Lshaped angle iron...

Posted: by boyerd492098

Recent Posts on BLAUGI

visit BLAUGI

AUGI HotNews - July 2015

Read the full issue (must be logged into in your browser. The full issue contains the below articles, plus sections - Forum Hot Topics, Special Announcements, Want to Volunteer?, HP Workstations, Articles You May Have Missed, Heads Up, Autodesk...


AUGIWorld July 2015 Issue Released!

The art of managing goes far beyond knowing how to effectively lead a staff. Managing is done every day by everyone - and they don't need to have the word "manager" in their job titles. In the July 2015 issue...


Recently Added Wishes

visit the wish list

Ability to copy base sheet with legends

In creating sheets for a large project ( current project has 10 floor and A-F section of the building)  I would like the ability to either set up a base sheet with all of the legends attached and duplicate the view or be able to copy…


Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

Poll - August 2015

See results in HotNews and the Library

Upcoming AUGI Events

  1. Revit Technology Conference - Asia 2015

    1. Equarius Hotel, Resorts World Sentosa, Singapore
  2. Revit Technology Conference - Europe 2015

    1. Corinthia Hotel, Budapest, Hungary
  3. Autodesk University 2015

    1. Venetian Resort Hotel Casino, Las Vegas, NV, USA

AUGI Benefactor

view all


Autodesk is a world leader in 3D design, engineering, and entertainment software.



The power to do more.



Partnering for your success