Recently Active Forums

visit the AUGI forums

2014 Substitute Block Name

I'm getting this error (attached as png) upon insertion of attached block... Though I have other blocks with names longer than 8 characters and they insert fine any ideas why this is occurring with this name and not others?

Posted: by mbrandt5

2015 Sloping ridge to a gable

Here's the example model. I did this original one with floor vs roofs because of how they set up the level offsets. Roofs go to bottom, floors generally go to top. Makes the math easier. Also you get cleaner results. But here you go. When you select a floor or roof object you get to adjust...

Posted: by david_peterson

2016 AutoCad Electric will not start

Ok, here is a problem that I have not run across in my 27 years of operating AutoCAD or Autodesk products. Recently installed 2016 Autodesk suit, installation went as normal. Inventor starts and work fine, in fact every thing seems to work well with the exception of AutoCAD. I start AE (AutoCAD...

Posted: by Rich_R

2016 Classic Array on a button

---Quote (Originally by Maverick91)--- Is ARRAYCLASSIC available on a button or a pull-down already? I want to be able use it more easily. If needed, I can simply create a tool on a palette. ---End Quote--- Click the AutoCAD Logo in the upper-left. Paste ARRAYCLASSIC in the search bar at the...

Posted: by Tom Beauford

2016 problème pour creer des etiquettes de pièces

Ok problème trouvé.... lors de la création des pièces il faut faire attention, il y a une option limite supérieure qui dans mon cas et pas défaut sur le niveau sur lequel je travaille alors qu'il faut indiquer le niveau au dessus...

Posted: by julieadrian705154


Recent Posts on BLAUGI

visit BLAUGI

Attend AU2015 and become an AUGI Premier Member Free!

Are you planning on attending AU2015 in Las Vegas this year? AUGI is rewarding the first 150 AUGI members who register with a free one year AUGI Premier Membership. Earlier this summer AUGI President Bob Bell discussed AUGI support for...

Posted:

AUGI HotNews - August 2015

Read the full issue (must be logged into AUGI.com) in your browser. The full issue contains the below articles, plus sections — Forum Hot Topics, Special Announcements, Want to Volunteer?, HP Workstations, Articles You May Have Missed, Heads Up, Autodesk...

Posted:

Recently Added Wishes

visit the wish list

Ability to Delete Viewport Types

I have created too many Viewport types in my template and would like to be able to delete some of the types.

Posted:

Units Conversion

I understand you are able to set unit using “insunits” to have a drawing insert into another drawing at the proper scale, but the problem is it is just scaled down (or up).  If the drawing you are trying to insert has several levels…

Posted:

Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

Poll - Aug/Sept

See results in HotNews and the Library

Upcoming AUGI Events

  1. Revit Technology Conference - Asia 2015

    1. Equarius Hotel, Resorts World Sentosa, Singapore
  2. Revit Technology Conference - Europe 2015

    1. Corinthia Hotel, Budapest, Hungary
  3. Autodesk University 2015

    1. Venetian Resort Hotel Casino, Las Vegas, NV, USA

AUGI Benefactor

view all
Autodesk

Autodesk

Autodesk is a world leader in 3D design, engineering, and entertainment software.

Dell

Dell

The power to do more.

HP

HP

Partnering for your success