Recently Active Forums

visit the AUGI forums

help combining lisp

Try this: Code: --------- (defun C:CW (/ area en ent obj ospace prefix pt remd resp suffix) ;;local defun (defun density (mat) (cond ((eq "90THK" mat) 0.000476328) ((eq "100THK" mat) 0.000529313) ((eq "115THK" mat) 0.00060871)

Posted: by pli

Cranked Beams

Oh, you mean a rigid frame or a bent. Don't need to do it as a family but if you have lost of them I'd suggest creating it as one or you can use model in place. You can use an in-place family using a sweep or a blended sweep. Draw your path, pick your profile (beam shape, should be able to find...

Posted: by david_peterson

2015 Impacts hidden by the beams- HELP

Make them 100% You should still see the outlines (beam edges)

Posted: by david_peterson

Revit Structures Cellular Beam Set-up K1 and K2 Values

Should be the distance from the centerline of the beam to the edge of radius for the top flange and bottom flange respectively since they can (and usually do differ in cellular (castellated) beams). My guess is you wouldn't really notice this most cases. I know there are several US companies...

Posted: by david_peterson

View Frame Rotation

I need to run through each view frame in a group and get the rotation for each frame. As far as I can tell there is no "rotation" property or transform matrix that can be accessed through .NET. I also can't find any such property that you can set in Civil 3D. If anyone can help me out it would...

Posted: by ckroll683940

Recent Posts on BLAUGI

visit BLAUGI

AUGI HotNews - November 2014

Read the full issue (must be logged into in your browser. The full issue contains the below articles, plus sections - Forum Hot Topics, HP Workstations at AU 2014, Special Announcements, Heads Up, Articles You May Have Missed, Autodesk...


AUGIWorld November 2014 Issue Released!

When it comes to sharpening your design skills through continuing education and training, you don't want to "wing it." Rather than take a haphazard approach to professional development - for yourself or your staff - create a detailed education plan.....


Recently Added Wishes

visit the wish list

Note Symbol

Would like to change note symbols from one designation to another without schedule to change or to go blank.


Create Design Control points

I’m setting profile grades for 2+ roads and would like the elevation at the intersection of the centerlines to match.  Is there a way to set it to where if I update one C/L elevation at the intersection, the elevation for the other…


Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

AUGI Poll - November 2014

Upcoming AUGI Events

  1. Autodesk University 2014

    1. Mandalay Bay Hotel and Casino. Las Vegas, NV, USA

AUGI Benefactor

view all


Autodesk is a world leader in 3D design, engineering, and entertainment software.



The power to do more.



Partnering for your success