The results of the Wish List voting held during July and August 2008 are presented below. The Points column totals the votes for a particular wish by giving a wish ten points for each first-choice vote, nine points for each second-choice vote, etc. through one point for each tenth-choice vote.

The First Choice column indicates how many first-choice votes a wish received.

The Score column normalizes the Points total for a wish by dividing it by the number of voters so that the popularity of a wish can be compared across voting cycles even though the number of voters in each cycle would differ.

		Points		First Choice	Score
1.	Folders in The Browser	564	29		490.43
	Be able to create folders in the browser to organize parts and hardware in a logical manner
	Submitted By:  Mark Ganz
2.	Quickly Check Assembly Constraints	398	13		346.09
	Have the ability to check the browser to see if parts are fully constrained - e.g. color coding fully constrained parts
	Submitted By:  Mark Ganz
3.	Lofted Sheet Metal Parts	228	5		198.26
	Lofted sheet metal parts the can be unfolded
	Submitted By:  Andy Rahden
4.	Ability to Change View Orientation After Creation	224	3		194.78
	After A view is created be able to edit view and adjust as needed to get a good presentation
	Submitted By:  Byron Funnell
5.	Browser Grouping of Features/Parts/Assemblies	203	0		176.52
	Be able to group browser features/parts/assemblies. Will make easier to read
	Submitted By:  Hall Stevenson
6.	Rolled Shapes That Can Be Flat Patterned	193	3		167.83
	Rolled shapes (more thean just round)that can be flat patterned
	Submitted By:  john guthery
7.	Highlight Overridden Dimensional Values	177	3		153.91
	If a dimensional value is overridden there should be an option to hi-lite that on a drawing.
	Submitted By:  Kristina Vogt
8.	Variable Value Constraints	176	6		153.04
	Be able to add variables to assembly constraints
	Submitted By:  Nico De Neef
9.	Ability to View Multiple Drawing Sheets Side by Side	168	2		146.09
	Be able to tile multiple sheet od IDW
	Submitted By:  Brian Burch
10.	Abbility to Unfold Spline Shaped Parts	143	2		124.35
	Be able to create spline shaped parts and unfold them
	Submitted By:  Cor de Vlaming

11.	Allow View Scale to be Used in the Title Block	135	2		117.39
	Be able to use the view scale in the title block without having to manually edit it.
	Submitted By:  Gary Masciadrelli
12.	Settable Workplane & Axis Colors	131	2		113.91
	Be able to individually set the color of workplanes and axes
	Submitted By:  Alan Mazzey
13.	Revision Table Tab in Part iProperties	125	2		108.70
	Create a new tab in the iProperties dialog to main tain revisions to a part/assembly/idw. These would be available to populate the rev block in a drawing.
	Submitted By:  Brian Burch
14.	Be able to use Presentation Files In IV Studio	124	1		107.83
	Be able to create better presentation ipn files by using IV Studio
	Submitted By:  Mark Flayler
15.	Ability to Change Drive Dimension	122	0		106.09
	Be able to change a driven dimendion after the affected one is deleted
	Submitted By:  Eric Clark
16.	Option to Break Dimension Lines	121	0		105.22
	Have Option to Break Dimension Lines
	Submitted By:  Stefan Åström
17.	Tool Tips that Show the File Name of Selected part	119	1		103.48
	A tool tip that shows the file name of the part/sub-assenbly
	Submitted By:  Dave Smith
18.	Ability to Edit Detail View	118	1		102.61
	Ability to edit detail view from original dialog that create it
	Submitted By:  Byron Funnell
19.	Single Part Representations	116	1		100.87
	The ability to show progressive building of a part in an IDW by being able to suppress features in the drawing enviornment
	Submitted By:  Glenn Laugesen
20.	Automatic IDW Creation of Derived Part/assembly	115	3		100.00
	When derived part/assembly is made have option to automatically create IDW
	Submitted By:  Barry A MacKinnon
21.	Boundary Pattern	115	6		100.00
	Ability to create a boundary and fill this with a feature pattern
	Submitted By:  Dan Schieb
22.	Changeable Default Thread Sizes & Depths	103	0		89.57
	Be able to set the default thread size and depths
	Submitted By:  Petr Talla
23.	Notification of Parts Updated During Opening a Assembly	99	2		86.09
	Optional Log file of updated items when opening an assembly/drawing file
	Submitted By:  Mark Flayler
24.	Pattern Type Tool	99	1		86.09
	Be able to create a sketched pattern of holes and designate them as an Inordinate Pattern. This would make them easier to populate with hardware.
	Submitted By:  Ed Vrzalik
25.	Casting Module	93	4		80.87
	To be able to create cast parts and be able to machine the desired surfaces. These could be shown as an overlay to pictoially be able to see the material to be removed
	Submitted By:  Gerrit van der Graaf
26.	Naming Fields in Virtual Part	91	0		79.13
	Be able to input quantity, part no. and description when creating a virtual part
	Submitted By:  Brian Burch
27.	Edittable 3D Points	89	2		77.39
	When using 3D points, the need to maintain the relationship to a spreadsheet will make them easier to manipulate in their w,y,z locations
	Submitted By:  Hall Stevenson
28.	On-the-Fly Dimension Modifiers	87	1		75.65
	Be able to add prefixed or postscript text, feature control symbols, tolerances, etc. to dimensions real time
	Submitted By:  Jim O'Flaherty
29.	Better Flexibility Between Spreadsheets and Drive Parts and Assemblies	76	2		66.09
	Improvements to the link between spreadsheets and drive parts and assemblies to allow better flexibility and manageability between the two.
	Submitted By:  Brian Schnautz
30.	Coil Feature that Follows Multiple Line Section Paths	76	1		66.09
	A coil feature the ability to follow a path of segments of straight and curved sections.
	Submitted By:  David Brown
31.	Tubing/Pipe Centerline Bisector	76	1		66.09
	Be able to create a continuous centerline bisector fo tubing/piping drawings (AIS)
	Submitted By:  Duncan Anderson
32.	Ability to Change Visibilty of Component Patterns in IDW	74	0		64.35
	Be able to turn off the visibilty of component patterns by selecting the pattern, RMB and select visibility. It is time consuming to do individually.
	Submitted By:  Brian Burch
33.	Identification of Suppressed Component Patterns	66	0		57.39
	Create a way to identify if component patterns are suppressed/partially suppressed
	Submitted By:  Brian Burch
34.	Reorder Prompted Entries	63	2		54.78
	Be able to reorder the prompted entries in the dialog box
	Submitted By:  Mark Flayler
35.	Access to IV's Dialog Boxes thru the API	63	4		54.78
	Access to IV's Dialog Boxes thru the APIto aid in user's customizations
	Submitted By:  Duncan Anderson
36.	Visiblity of Placed LOD Component	62	1		53.91
	When placing a part/assy in an active LOD option automatically suppress it in other LOD's
	Submitted By:  Brian Burch
37.	Add Apply to Surface Tool	60	1		52.17
	Add apply button to Surface Tool
	Submitted By:  Robert Reid
38.	Foreshortened Radii with Center Mark	58	1		50.43
	Ability to foreshorten large radius portion of the dimension line extending from the arrowhead is radial relative to the arc. Where the radius dimension line is foreshortened and the center is located by coordinate dimensions, the dimension line locating the center is also foreshortened. From ASME Y14.5
	Submitted By:  Tim Rumph
39.	Independent Control of XYZ Translations and Rotations	49	0		42.61
	More independent control of constraints
	Submitted By:  Matt T
40.	Flexible Weld ASssemblies	46	1		40.00
	Be able to create flexible welded assemblies
	Submitted By:  Thomas Hendry
41.	Make Dynamic Parts Available to Assemblies	44	0		38.26
	Make the simulation parts avaailable for use in assemblies, so not have to model them after the fact.
	Submitted By:  jon selzer
42.	Wire Segment Splitting	43	0		37.39
	Ability to continue entries from a wire point to add more segments
	Submitted By:  Todd Hall
43.	Multiple Hatch Selections	38	1		33.04
	Be able to select multiple ares to hatch without ceating one and redoing the hatch command
	Submitted By:  Jason Sprenger
44.	Alignment of Broken Aux Views	38	0		33.04
	Make broken Aux view segments aligned with each other.
	Submitted By:  Gary Harrison
45.	Recent Open Files List in Open Dialog Box	36	0		31.30
	Add recent open files list to the "Open" dialog box
	Submitted By:  Brian Cranston
46.	Linked Patterns of Flexible Assemblies	33	1		28.70
	Where patterns of flexible assemlies are used be able to link them so that if one flexes the others would follow suit
	Submitted By:  Thomas Hendry
47.	Definable Point to Anchor Tables	32	0		27.83
	Be able to assign point to place a table so it stays put
	Submitted By:  jon selzer
48.	Ability to Select Existing Weld Joint in Model/Assembly	31	0		26.96
	Ability to Select Existing Weld Joint in Model/Assembly
	Submitted By:  Boris Gorbulenko
49.	Component Pattern with Holes Created at Assembly Level	31	0		26.96
	Be able to pattern components hole patterns created in the assembly
	Submitted By:  Petr Talla
50.	Make CSV File Work Like XML Updating Wire Numbers	30	3		26.09
	When importing wires from ACADE using a csv file have AIP change the numbers like the XML files
	Submitted By:  Todd Hall
51.	One Button Wire Removal	27	0		23.48
	Be able to multi-select unwanted wires from a harness and remove with one click.
	Submitted By:  Todd Hall
52.	Retain Values in Surface Texture Dialog	23	1		20.00
	Retain inputted values in surface texture dialog
	Submitted By:  Karel Cedivoda
53.	Suppression of Child Section View	19	0		16.52
	Be able to suppress child secrion views and still have the section view arrows visible in the parent view
	Submitted By:  Thomas Rambach
54.	Control of Tables - Column and Row Visibility	16	0		13.91
	Be able to switch selected colummns and rows visibilty on and off
	Submitted By:  Virginia Padale
55.	Creation of Service Loops in Cable /Harness	14	0		12.17
	Be able to set the amount of service loop needed when creating a cable.
	Submitted By:  Brian Burch
56.	Separate Floating "Simulation Panel "	5	0		4.35
	Have the Simulation Panel as a separate floating panel
	Submitted By:  jon selzer
57.	Harness Wires Shown as the Same Length in a Nail board View	4	0		3.48
	In Nailboard views have the wires shown as the same length
	Submitted By:  David Brown
58.	Multiple Wire Harness Views in an IDW	2	0		1.74
	Be able to create multiple views of harness assemblies in an IDW
	Submitted By:  David Brown