Recently Active Forums

visit the AUGI forums

2013 Creating Cross Sections from Survey Points

Typically, to create sections in C3D, you would need an alignment and then specify a sample line group which would then contain specified sample lines. Your section would then be generated from the sample lines. To add survey points to sections, you would need to select your desired section view...

Posted: by Opie

2015 Can't find my properties palette

I thought we found the properties palette already. ;)

Posted: by Opie

2012 inserting text into the text override field automatically?

---Quote (Originally by cadtag)--- So, the end result is a drawing with faux dimensions that don't match the distances actually drawn. ---End Quote--- Unfortunately, it is a necessity at times. I abhor these types of drawings, but I deal with it as needed. That is why I despise survey...

Posted: by Opie

2013 Mysterious DWG

Do you have linetypes with names that start and end with curly brackets "{ }"? If so, you will need to look at the DGN Purge tool ( provided by Autodesk as a Hotfix. You might also look...

Posted: by Opie

2015 New Civil Engineering Data Translator

I haven't yet. What are your initial thoughts on it?

Posted: by Opie

Recent Posts on BLAUGI

visit BLAUGI

AUGI HotNews - December 2014

Read the full issue (must be logged into in your browser. The full issue contains the below articles, plus sections - Forum Hot Topics, Special Announcements, HP at Autodesk University, Heads Up, Articles You May Have Missed, Autodesk News,...


AUGIWorld December 2014 Issue Released!

Whether you're spending the first week of December at Autodesk University or it's business as usual in your office, you can, make that must, continually cultivate your professional network. This precious collection of colleagues can come to your rescue in...


Recently Added Wishes

visit the wish list

Avoid pipe disconnects when Reapply type option is used

When you use the Reapply type option on a large number of elements revit disconnects the major part of these elements and then you have to manually connect them again. There’s a lot of time lost reconnecting the elements. In my opinion this is…


Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

AUGI Poll - November 2014

Upcoming AUGI Events

  1. There are no upcoming AUGI events.

AUGI Benefactor

view all


Autodesk is a world leader in 3D design, engineering, and entertainment software.



The power to do more.



Partnering for your success