Recently Active Forums

visit the AUGI forums

I wish the default 3D view had a perspective toggle.

I'm not sure what you're referring to. The "toggle" has been there forever but it's always been disabled in simple orthographic views. 3D perspective view needs to become a standard view that's also fully editable. Not just something for looking at your model.

Posted: by tomek124735

Windows 7 Account Settings?

It does also depend on the acad version that you're using; older ones (pre 2010 ? ) may require more access as they weren't written for Win_7.

Posted: by jaberwok

lsp without autoCAD?

---Quote (Originally by rkmcswain)--- And if you care about it, you should probably also discuss with your employer the ownership of the code you create. Who is going to own the code and/or compiled versions of it if you separate? You? Your former employer? If this is a concern, hammer it...

Posted: by BlackBox

2015 Shape file

Loading a linetype that references a shape file will load that shape file. You should not have to manually load a shape file unless you want to insert the shapes using the SHAPE command (as you have seen). Perhaps the shape file that won't load is in reality a font file? (they share the SHX...

Posted: by rkmcswain

LISP to move up or down

Instead of using the Move command to just change the Elevation, you should use the Change command: (command"_.Change""_L""""_P""_E" e1 "")

Posted: by pli

Recent Posts on BLAUGI

visit BLAUGI

AUGI HotNews - November 2014

Read the full issue (must be logged into in your browser. The full issue contains the below articles, plus sections - Forum Hot Topics, HP Workstations at AU 2014, Special Announcements, Heads Up, Articles You May Have Missed, Autodesk...


AUGIWorld November 2014 Issue Released!

When it comes to sharpening your design skills through continuing education and training, you don't want to "wing it." Rather than take a haphazard approach to professional development - for yourself or your staff - create a detailed education plan.....


Recently Added Wishes

visit the wish list

Create Design Control points

I’m setting profile grades for 2+ roads and would like the elevation at the intersection of the centerlines to match.  Is there a way to set it to where if I update one C/L elevation at the intersection, the elevation for the other…


Rotate pipe network structure by view orientation

Enable a toggle to be able to set the view orientation of a pipe network structure to match that of the view port.  Particularly for the plan view display of structures that use a block with a letter designation. When enabled a storm drain…


Join AUGI Today

Become part of the largest Autodesk community

Member Login

Lost Your Password?

AUGI Poll - November 2014

Upcoming AUGI Events

  1. Autodesk University 2014

    1. Mandalay Bay Hotel and Casino. Las Vegas, NV, USA

AUGI Benefactor

view all


Autodesk is a world leader in 3D design, engineering, and entertainment software.



The power to do more.



Partnering for your success